Subaru Trailer Hitch Installation And Review Videos
Draw-Tite Max-Frame Trailer Hitch Installation - 2014 Subaru Forester- Video
Hey everybody, Ryan here at etrailer. Today, on our 2014 Subaru Forester, we're gonna be showing you how to install the Draw-Tite Class III trailer hitch receiver. But before we do that, why don't we check it out and make sure that this is something that's gonna work for you. So, these Subaru's are really versatile and people use them to do a little bit of everything. So, if it we're me and I was looking for a hitch, I'd want one that can handle pretty much anything that you wanna throw at it. That way, whenever you're pulling a trailer or using an accessory, you're not gonna have any issues. more
Watch Video
6/17/2021 1:51:24 PM
EcoHitch Hidden Trailer Hitch Installation - 2017 Subaru Forester- Video
Hey everybody, Ryan here at etrailer. Today on our 2017 Subaru Forester, we're gonna be showing you how to install the EcoHitch trailer hitch receiver. But before we do that, why don't we check it out and make sure that it's going to work for you I know whenever I'm driving down the road I see people using these foresters to do pretty much everything. I've seen them with bike racks on the back, cargo carriers, even doing some towing. Pop-up campers, kayak carriers and things like that. If it we're me and I had a Forester, I think I would want a hitch that would handle pretty much anything I want to throw at it. more
Watch Video
6/4/2021 11:08:57 AM
Draw-Tite Max-Frame Trailer Hitch Installation - 2021 Subaru Ascent- Video
Hey everybody, how's it going Today, we're gonna be going over, and showing you how to install, the Draw-Tite Trailer Hitch Receiver here on a 2021 Subaru Ascent. So, the nice thing about the Draw-Tite hitch, is that it's actually hidden behind our factory knockout panel. Therefore, when we're not using the hitch, we get a completely factory-like installation. But, when we're ready to use it, it's super simple to remove this panel here. We're gonna have a push pin fastener on the bottom of each side. We'll take a pry tool, pry the center out, then pull it the rest of the way out. more
Watch Video
5/7/2021 6:51:28 AM
etrailer Class III Trailer Hitch Installation - 2020 Subaru Crosstrek- Video
Hey everyone. Shane here with the etrailer.com. Today I have a 2020 Subaru Crosstrek. I'm going to walk through how to install the etrailer.com Class 3 Trailer Hitch Receiver. This is what our hitch is going to look like on the vehicle. You can see the cross tube is completely hidden all you can see is the receiver tube. more
Watch Video
4/29/2021 1:21:47 PM
Curt Trailer Hitch Installation - 2020 Subaru Crosstrek- Video
Hey everyone, Shane here with etrailer.com. Today I have a 2020 Subaru Crosstrek. I wanna walk you how to install the Curt Class III Trailer Hitch Receiver. Adding a Class III hitch onto your vehicle is gonna give you a lot of different options. Maybe you wanna put a bike rack on. Maybe you have bikes you're tired of loading inside, but you don't wanna get a bike rack for the top of your roof because you don't wanna pick up our bikes or take them down each time. more
Watch Video
4/29/2021 1:20:38 PM
etrailer Trailer Hitch Installation - 2016 Subaru Outback Wagon- Video
Hey, everybody, Clayton here at etrailer.com. Here at etrailer, we install, test, and review a lot of different products to help you as a customer make a more educated decision before your purchase. And today we're gonna be working on a 2016 Subaru Outback Wagon. We're gonna be taking a look at, and I'll be showing you how to install our etrailer Class III Trailer Hitch Receiver. Adding a trailer hitch to the back of your Outback is gonna be a huge upgrade. It's gonna allow you to get your bikes off of your roof, or out of your trunk and onto a bike rack. more
Watch Video
3/22/2021 12:40:34 PM
EcoHitch Hidden Trailer Hitch Installation - 2021 Subaru Forester- Video
Hey, everybody, Ryan here at etrailer. Today on our 2021 Subaru Forester we're gonna be taking a look at and showing you how to install the EcoHitch Class III Trailer Hitch Receiver. So one of the main things that really separates this hitch from many of the others is the fact that it's going to be, for the most part, completely hidden. Really the only thing you're gonna be able to see is this receiver tube opening. And so it's gonna do a great job of maintaining that factory appearance. And on the same note, we're still gonna be able to have that ease of use and functionality that we're looking for. more
Watch Video
3/10/2021 7:42:52 AM
Draw-Tite Max-Frame Trailer Hitch Installation - 2021 Subaru Forester- Video
Hey everybody, Ryan here at etrailer. Today we're gonna be taking a look at and showing you how to install the Draw-Tite class three trailer hitch receiver on our 2021 Subaru Forester. Wide most Subarus I do see these foresters getting used to do pretty much a little bit of everything. So whether you plan on using a accessory like a bike rack or a cargo carrier or plan on doing some towing, or maybe even a little bit of both, personally I would want a hitch that would be able to handle pretty much anything that you want to throw at it. And that's exactly what this one is going to allow us to do. So I will say the hitch is going to be pretty much completely visible. more
Watch Video
3/10/2021 7:42:51 AM
Curt Trailer Hitch Installation - 2004 Subaru Outback Wagon- Video
Hi there Super runners. Today in your 2004 Subaru Outback wagon we're gonna be taking a look at and showing you how to install Curt's class two one and a quarter inch trailer hitch receiver. And this is what our hitch looks like when it's installed. The cross tube is gonna be visible but it's tucked up very far underneath the vehicle. So unless you're getting down here on your knees like we are, you're really not gonna notice it. The receiver here at the back is a one and a quarter by one and a quarter so it's gonna be great for all of your light duty applications. more
Watch Video
2/26/2021 10:38:01 AM
Curt Trailer Hitch Installation - 2021 Subaru Crosstrek- Video
Hey everybody my name's Ryan and here at etrailer we install, test fit, and review a lot of different parts. That way we can try to help answer any questions those of you might have. And that's exactly what we're doing here today on our 2021 Subaru Crosstrek. We're gonna be taking a look at and showing you how to install the Curt Class 3 Trailer Hitch Receiver. So right off the bat getting a hitch for your Subaru is never a bad thought. These Crosstrek's are really versatile and you can use them to do a lot of different things. more
Watch Video
2/22/2021 4:43:22 AM
Curt Trailer Hitch Receiver Installation - 2021 Subaru Crosstrek- Video
Hey everybody, my name's Ryan and here at etrailer, we install, test fit, and review a lot of different parts. That way we could try to help answer any questions those of you might have. And that's exactly what we're doing here today on our 2021 Subaru Crosstrek. We're gonna be taking a look at, and showing you how to install the Curt class two trailer hitch receiver. So when it comes to hitches just for the Crosstrek there really is a ton of different options available. And whichever one is going to fit your needs the best is really just going to depend on what you plan on using it for. more
Watch Video
2/22/2021 4:43:04 AM
Draw-Tite Max-Frame Trailer Hitch Installation - 2021 Subaru Crosstrek- Video
Hey everybody, my name is Ryan. And here at etrailer, we install, test, fit, review a lot of different parts. That way we could try to help answer any questions those of you might have. And that's exactly what we are doing here today on our 2021 Subaru Crosstrek. We're gonna be taking a look at and showing you how to install the Draw-Tite Max-Frame trailer hitch receiver. So I know I see these Subarus getting used to do a little bit of everything. more
Watch Video
2/22/2021 4:38:10 AM
etrailer Class III Trailer Hitch Installation - 2021 Subaru Crosstrek- Video
Hey everybody, my name's Ryan. And here at etrailer, we install, test fit and review a lot of different parts. That way we could try to help answer any questions those of you might have. And that's exactly what we're doing here today on our 2021 Subaru Crosstrek. We're gonna be taking a look at and showing you how to install the etrailer Class III Two Inch Trailer Hitch Receiver. So I know whenever I'm going down the road, I see these Crosstreks are being used to do a little bit of everything. more
Watch Video
2/22/2021 4:37:53 AM
Curt Trailer Hitch Installation - 2021 Subaru Ascent C25VR- Video
Ryan: Hey everybody, my name's Ryan and here at etrailer, we install, test, fit and review a lot of different parts. That way we can try to answer any questions those of you might have. That's exactly what we're doing here today on a 2021 Subaru set. We're going to be taking a look at and showing you how to install the Curt class three trailer hitch receiver. So right off the bat, probably one of my favorite things about this hitch is the fact that it could be completely hidden whenever you're not using it. So whenever you are ready to use it, you can pull off this removable panel and you have super easy access. more
Watch Video
12/30/2020 12:47:47 PM
Curt Trailer Hitch Installation - 2021 Subaru Forester- Video
Ryan: Hey everybody. My name is Ryan and here at etrailer, we install, test, fit and review a lot of different parts. That way we could try to answer any questions those of you might have. And that's exactly what we're doing here today on our 2021 Subaru Forester. We're going to be taking a look at and showing you how to install the CURT Class 3 Two Inch Trailer Hitch Receiver. So I know personally whenever I'm driving down the road, I see these Subarus getting used for a little bit of everything. more
Watch Video
12/17/2020 8:12:11 AM
Curt Trailer Hitch Installation - 2021 Subaru Forester C12198- Video
Ryan: Hey everybody. My name is Ryan and here at etrailer, we install, test, fit, and review a lot of different parts. That way we could try to answer any questions those of you might have. And that's exactly what we're doing here today on our 2021 Subaru Forester. We're going to be taking a look at and showing you how to install the CURT Class 2 trailer hitch receiver.Now I will say probably the first thing I noticed about the hitch is the fact that it is somewhat visible. However, it does sit quite a ways back. more
Watch Video
12/16/2020 1:27:07 PM
Curt Trailer Hitch Installation - 2013 Subaru Outback Wagon- Video
Ryan: Hey, everybody. My name's Ryan. And here at etrailer we install, test fit, and review a lot of different parts that way we can try to answer any questions those of you might have. And that's exactly what we're doing here today on our 2013 Subaru Outback wagon. We're going to be taking a look at and showing you how to install the Curt class two trailer hitch receiver.I see a lot of Subarus going down the road with many different types of accessories. These Outbacks actually wear them really well. more
Watch Video
11/4/2020 12:57:09 PM
Draw-Tite Max-Frame Trailer Hitch Installation - 2011 Subaru Outback Wagon- Video
Ryan: Hey everybody, my name's Ryan and here at etrailer, we install, test, fit and review a lot of different parts. That way we can try to answer any questions those of you might have. And that's exactly what we're doing today on our 2011 Subaru Outback wagon. We're going to be taking a look at and showing you how to install the Draw-Tite Class III Trailer Hitch Receiver. Many of our Subaru customers plan on using their vehicles to do a little bit of everything. So if it we're me, I would want a hitch I can handle anything you throw at it. more
Watch Video
10/19/2020 9:17:14 AM
Curt Trailer Hitch Installation - 2020 Subaru Ascent- Video
Hey everybody. It's Rob here, at etrailer.com. Today we're going to be taking a look at the CURT class 3 custom fit trailer hitch receiver, on our 2020 Subaru Ascent.Now I know everybody wants to see what the hitch looks like, but if you stick around in the end of the video, we are going to go over how to install it. Now, believe it or not, our hitch is actually in place now. And that's one of my favorite things about the hitch is when we're not using it, it's not going to change any outward appearance of our Subaru.But when we do want to use it, we're going to remove the two push pins at the bottom of this panel. And this panel is actually removable, so we can get access to our hitch. more
Watch Video
9/2/2020 12:12:41 PM
Draw-Tite Max-Frame Trailer Hitch Installation - 2020 Subaru Outback Wagon- Video
Shane: Hey everyone, Shane here with etrailer.com. Today I have a 2020 Subaru Outback wagon, and I want to walk you through how to install the Draw-Tite Class III Trailer Hitch Receiver. When thinking about putting a hitch on our vehicle, we need to think about what we're going to be using the hitch for. And Class III hitches is going to allow you a lot of different opportunities for either pulling a trailer, cargo carrier, bike rack, putting different ball mounts on, put a cargo carrier on there. We can get stuff out of the vehicle, put it on the cargo carrier, to make more room for our passengers. Bike rack, we're not going to try to load the bikes inside the car or on top of the roof, we'll be able to put them on the bike rack and make it a lot more easier, accessible for you to get your bikes off.This is what our hitch is going to look like once it's installed, you can see the receiver tube is nice and tucked up pretty far up behind the fascia. more
Watch Video
8/28/2020 10:27:12 AM
etrailer Class III Trailer Hitch Installation - 2015 Subaru Forester- Video
Ryan: Hey everybody, Ryan here at se-trailer. Today on our 2015 Subaru Forester, we're going to be taking a look at and showing you how to install the se-trailer.com class three trailer hitch receiver. So right off the bat, there's a couple of things I noticed about the hitch. First one being how it's going to look. So even though for the most part, it is completely visible, in my opinion I kind of think it compliments that adventurous look that the Subaru has. A lot of these Subaru do actually look better with accessories on them at least in my opinion. more
Watch Video
8/26/2020 11:52:11 AM
Draw-Tite Max-Frame Trailer Hitch Installation - 2020 Subaru Outback Wagon DT94MR- Video
Hey everybody, Ryan here at etrailer. Today on our 2020 Subaru Outback wagon. We're going to be taking a look at it, and showing you how to install the draw tight max frame trailer hitch receiver. So one of the things I really like about the hitch is the way it's going to look, once you have it installed on the back of your Subaru. Since the main portion of the hitch sits behind the bumper, it's going to be pretty much completely hidden. And only thing you're really going to be able to see is the receiver tube opening here. more
Watch Video
8/13/2020 2:55:05 PM
Curt Trailer Hitch Installation - 2017 Subaru Forester- Video
Hi there Subaru owners. Today on your 2017 Subaru Forester, we're going to be taking a look at and showing you how to install CURT's Class 3 two inch trailer hitch receiver.And this is what our hitch looks like when it's installed. The cross tube is going to be completely hidden behind the bumper so you're only going to notice the receiver here at the back. It's a Class 3 two inch by two inch receiver, so it's going to be great for all of your towing needs. Whether you're wanting to put a bike rack in it and load up four bikes on a platform rack, or you need it for a cargo carrier, or you just have some work you need to get done, you can put a ball mount in it and haul around utility trailer.This hitch uses a five eights inch hitch pin and clip. One doesn't come included with the hitch, but we've got plenty available here at etrailer.com. more
Watch Video
7/17/2020 8:08:45 AM
etrailer Trailer Hitch Installation - 2016 Subaru Crosstrek- Video
Rob: What's going on, everybody It's Rob here at etrailer.com and today we're going to be taking a look at the etrailer Class III Custom Fit Trailer Hitch Receiver on our 2016 Subaru Crosstrek. Now obviously we know that everybody wants to see what it's going to look like and go over some of the features. So we're going to go ahead and do that first. But if you stick around to the end of the video, we're also going to show you how to get it installed so you can have the confidence to do it at home.But here's what our hitch looks like once we have it installed. This is probably one of my favorite hitches on the Crosstrek. Most of them have the cross tube visible like we have here. more
Watch Video
7/14/2020 2:33:09 PM
Draw-Tite Max-Frame Trailer Hitch Installation - 2016 Subaru Crosstrek- Video
Hey, everybody. It's Rob here at etrailer.com. And today, we're going to be taking a look at the Draw-Tite class three custom fit trailer hitch receiver on our 2016 Subaru Crosstrek. Now we're going to go ahead and look at our hitch, go over some of the features here's because we know everybody wants to know where to look like before they install it. If you stick around to the end of the video, we are going to show you how to get it installed so you have the competence to do it at home. But here's what the hitch is going to look like once we have it installed. more
Watch Video
7/14/2020 2:32:26 PM
Draw-Tite Sportframe Trailer Hitch Installation - 2016 Subaru Crosstrek- Video
Rob: Hey everybody, it's Rob here at etrailer.com and today we're going to be taking a look at the Draw-Tite class one custom hitch trailer that you see here on our 2016 Subaru Crosstrek. Now, I know everybody wants to see what it's going to look like, go over some of the features, but if you stick around to the end of the video, we are going to show you how to get it installed so you can have the confidence to do it at home. But here's where our hitch is going to look like once we do have it installed. The cross tube is going to be visible, it's going to sit down right below the bumper. But what I do like about it is, it is tucked up really nice and tight against the bottom of the body here. And our Crosstrek sits kind of low, so you're not going to see it too much unless you're really looking for it.Another thing to note is that our receiver tube is almost flush with the outer edge of the bumper. more
Watch Video
7/14/2020 2:27:43 PM
Draw-Tite Trailer Hitch Installation - 2020 Subaru Forester- Video
Hi there Subaru owners, today in your 2020 Subaru Forester, we're going to be taking a look at and showing you how to install Draw-Tite's Class II, 1-1/4 inch Trailer Hitch Receiver. And this is what our hitch looks like when it's installed. Now the cross tube is going to be visible, but the entire assembly is tucked so far up under the bumper, for the most part you can't even notice that there's even a hitch installed on this thing. Unless you get down on your knees or bend over, you're almost not even going to notice that it's there, because of the way it's tucked up so nicely.It has a Class II, 1-1/4 x 1-1/4 receiver. So it's going to be great for all of your light duty applications, whether you're wanting to put, accessories in it like a cargo carrier or bike rack, or if you have some light duty towing that you need to do you can also get a little bit of towing down with this as well. It uses a 1/2 inch hitch pin and clip. more
Watch Video
7/1/2020 7:27:50 AM
Curt Trailer Hitch Installation - 2020 Subaru Outback Wagon- Video
Ryan: Hey everybody, Ryan here at etrailer. Today on our 2020 Subaru Outback wagon, we're going to be taking a look at and showing you how to install the Curt trailer hitch receiver at all the hitches available for the Outback.I will say I'm most impressed with this one. That's really for a couple of different reasons. First one being it's going to look really good. It's going to be pretty much hidden for the most part, but still really easy to use. The other reason is it's going to be extremely versatile. more
Watch Video
6/8/2020 1:07:52 PM
Curt Trailer Hitch Installation - 2020 Subaru WRX- Video
Hey everybody, it's Rob here at etrailer.com. Today we're going to be taking a look at the CURT Class 1 custom fit Trailer Hitch receiver on our 2020 Subaru WRX. Now, here's what our hitch is going to look like once we have it installed. The crosstube is going to be visible, it's going to hang down right below the bumper and the receiver tube is going to be pretty close to being flushed with the back bumper. Now, it is a Class 1, which means it's going to give us that 1-1/4' by 1-1/4" receiver tube opening, and it's to be great for light duty towing, maybe putting a bike rack or a small cargo carrier in there. But regardless of how we're going to use our hitch, all of our accessories are going to mount to the hitch pin hole here on the side. more
Watch Video
5/19/2020 11:37:08 AM
Shane: Hey guys, Shane here with etrailer.com. And today I have a 2020 Subaru Outback Wagon. I'm going to be installing the stealth hidden hitch tow package. With this package, you're going to get your ball mount. You're going to get your wiring, your receiver tube, and a set of keys. One of the things I really like about this hitch that is going to be different than any other hitch that is available for the Outback Wagon is that our ball mount and our receiver tube are removable. more
Watch Video
5/15/2020 11:07:07 AM
EcoHitch Invisi Trailer Hitch Installation - 2020 Subaru Ascent- Video
Ryan: Hey, everybody, Ryan here at etrailer. Today, on our 2020 Subaru Ascent, we're going to be taking a look at and showing you how to install the EcoHitch class three trailer hitch receiver. So, the best part about this hitch is that it's going to sit behind our bumper. That way, whenever you're not using it, it can remain completely hidden, and that's because we're going to have an access panel that you can simply just put back in place and maintain that factory look.Most of our Ascent customers use our Subarus to do a little bit of everything, which not only includes towing, but also carrying hitch-mounted accessories. Well, this is going to be a good all around hitch for that, and that's for a couple of different reasons. Since it does sit behind our bumper, that's going to bring it up off the ground more, so it's going to give us a really good ground clearance, and it's going to give us good bumper clearance.So, what I mean by that is, the end of the receiver tube, even though it is hidden, it's going to be pretty much flush here with the edge of our bumper, so that's going to give us more than enough space to use any folding accessories that we might have without having to worry about them contacting the back of our car.And for those of you that do plan on doing quite a bit of towing, this hitch is going to be set up really good for that. more
Watch Video
4/27/2020 10:57:37 AM
etrailer Trailer Hitch Installation - 2017 Subaru Outback Wagon- Video
Ryan: Hey everybody. Ryan here at etrailer. Today on our 2017 Subaru Outback Wagon, we're going to be taking a look at and showing you how to install the etrailer.com Class Three, two inch Trailer Hitch Receiver. Many of our Subaru customers use their Outbacks to do a little bit of everything, whether it be pulling a trailer, using an accessory like a bike rack or cargo carrier. This is going to give us a connection point to be able to get the job done and not to mention, since we'll have an opportunity to carry our accessory back here, we're going to have space up top freed up that way we're still able to use any rooftop accessories. One of the things I like about this hitch is that it's going to sit back a little bit behind our bumper and it's going to have a carbide matte black finish, so it's really going to blend in nicely on the back of our Subaru.It's also going to give us some really good clearance and so, what I mean by that is the end of the receiver tube is going to be just about even with our back bumper, so this should work out really well for any folding accessories like a bike rack or a cargo carrier for example. more
Watch Video
4/8/2020 6:22:22 AM
Curt Trailer Hitch Installation - 2020 Subaru Forester- Video
Hey everybody, Ryan here at etrailer today on our 2020 Subaru Forester, we're going to be taking a look at and showing you how to install the Curt class three, two inch trailer hitch receiver. In my opinion, this is going to be a great all around hitch. Not only is it going to look pretty good, but it's also going to be really easy to use. The end of the receiver tube is going to sit just behind our bumper and give us plenty of clearance for many different types of accessories. And since there's nothing really here, interfering with the hitch, it's going to be really easy to get your pin and clip in as well as hook on your safety chains. Now, as far as looks go compared to some of the other hitches, this one is going to be a little bit more visible, but since the cross tube does sit pretty far back and it is going to blend in really nice.You're really not going to notice it, especially when the car is sitting on the ground. more
Watch Video
3/18/2020 1:43:27 PM
Curt Trailer Hitch Installation - 2020 Subaru Forester C12198- Video
Ryan: Hey, everybody, Ryan here at etrailer. today on our 2020 Subaru Forester, we're going to be taking a look at and showing you how to install the CURT class two trailer hitch receiver. In my opinion, this hitch is going to be a great choice for you if you plan on only using inch and a quarter accessories, or especially if you already have them. And since it is more of a low profile design, it is going to be less visible and in my opinion look pretty good on the back of the Subaru.So this is going to be a class two hitch so it's going to have that inch and a quarter by inch and a quarter receiver tube opening, and a reinforced collar for some extra strength. It's going to have the standard half inch size pinhole. Now pin and clip does not come included, but if you need one, you can find it here at etrailer. more
Watch Video
3/18/2020 1:42:50 PM
Curt Trailer Hitch Receiver Installation - 2019 Subaru Crosstrek- Video
Hey everybody. Rob here at etrailer.com and today we're going to be taking a look at the Curt Class II custom fit trailer hitch receiver on our 2019 Subaru Crosstrek. Now here's where our hitch is going to look like once we have it installed. I really like it because the crosstube's completely hidden behind the bumper here and all we're going to see is that receiver tube sticking out. Not to mention the receiver tube is almost flush with the back bumper, so we don't have to worry about walking by and hitting our leg on it. Now it is a Class II, which means it's going to give us that 1-1/4" by 1-1/4" receiver tube opening, which would be great for accessories like bike racks. more
Watch Video
2/12/2020 2:07:04 PM
Best 2020 Subaru Ascent Trailer Hitch Options- Video
Ryan: Hey everybody. Ryan here at etrailer.com. Today we're going to be taking a look at your best trailer hitch options for your 2020 Subaru Ascent. Today we're going to be talking about three different hitches. We're going to have the Draw-Tite, the EcoHitch, and the Curt.Now before we kind of dive in and talk about the main differences between the three, I'd like to tell you which one I would personally choose why. The one I would choose is the Draw-Tite. more
Watch Video
2/7/2020 10:32:27 AM
Draw-Tite Max-Frame Trailer Hitch Installation - 2020 Subaru Ascent- Video
Ryan: Hey everybody, Ryan here at etrailer.com. Today on our 2020 Subaru Ascent, we're going to be taking a look at and showing you how to install the Draw-Tite Max-Frame Trailer Hitch Receiver.So this is what your hitch is going to look like installed whenever you're not using it, which is perfect. Everything's nice and hidden. But whenever you are ready to use it, this center panel here will be easily removed. Going to be a couple of clips down at the bottom of it, see how those removed, and simply pop this off out of the way, and now you'll have full access to be able to use your hitch for towing a trailer, or even your accessories. That's my favorite thing about this hitch: it's going to be nice and hidden when you want it to be, but whenever we need it to use it, we're not going to have to sacrifice any functionality or ease of use.And what I mean by that is a couple of different things. more
Watch Video
2/6/2020 10:37:34 AM
etrailer Trailer Hitch Installation - 2014 Subaru Outback Wagon- Video
Hi there, Subaru owners. Today, in your 2014 Subaru Outback wagon, we're going to be taking a look at and showing you how to install etrailer.com's two inch trailer hitch receiver.And this is what our hitch looks like when it's installed. Our cross tube is going to be visible down beneath our bumper, but it's tucked back nicely so it doesn't really detract from the looks of the vehicle too much. I actually liked the way that our receiver here fits into the cutout on our bumper, and it almost looks like it was supposed to be that way from the factory.It's a class two, two inch receiver, so it's going to be great for all of your towing needs. Whether you want to put a bike rack in it and load it up with a bunch of bikes, or if you want to bring a pop-up camper with you for the weekend, you should be able to do so with this hitch.This hitch uses a five-eighths inch hitch pin and clip. Now, one does come included with our hitch, but we have plenty here at etrailer.com that you can pick up. more
Watch Video
2/4/2020 11:12:25 AM
Curt Trailer Hitch Installation - 2015 Subaru Outback Wagon- Video
Hi there, Outback owners. Today on your 2015 Subaru Outback, we're going to be taking a look at and showing how to install CURT's Class 3 2" trailer hitch receiver. The crosstube's hidden completely behind our bumper, so the only thing that you're going to be able to see is the receiver tube here at the back. It does stick down and out a little bit so it is noticeable, but it doesn't detract from the looks of the vehicle too much.It's a Class 3 2" by 2" receiver, so it's going to be great for all of your towing needs, whether you want to take a bike rack, load it up with four bikes, or your camper with you to the cabin for the weekend. It uses a 5/8" hitch pin and clip. Now one doesn't come included with the hitch but you can pick one up here at etrailer.com.On the bottom we have loop-style safety chain hoops. more
Watch Video
12/17/2019 11:27:06 AM
EcoHitch Hidden Trailer Hitch Installation - 2015 Subaru Outback Wagon- Video
Hi there, Outback owners. Today in our 2015 Subaru Outback, we're going to be taking a look at, and showing you how to install eco hitches, Class II one and a quarter inch trailer hitch receiver. This is what our hitch looks like when it's installed. The cross tube is completely hidden behind the facia, so you'll only see the receiver here at the back and it tucks up nicely underneath the bumper so it really doesn't attract much from the looks of the vehicle. It's a Class II one and a quarter by one and a quarter inch receiver, so it's going to be great for all of your light duty applications. Whether you want to put a bike rack in it and bring some bikes with you to the trail, or if you want to put in a very small utility trailer and do some very light towing. more
Watch Video
12/15/2019 10:12:04 AM
EcoHitch Hidden Trailer Hitch Installation - 2020 Subaru Forester- Video
Ryan: How's it going Ryan here at eTrailer.com. Today on our 2020 Subaru Forester, we're going to be taking a look at and showing you how to install the eco hitch hidden trailer hitch receiver. Now the main thing that separates this hitch from some of the others is that it's going to be completely hidden. The only thing you're going to be able to see is the receiver tube opening and your safety chain plates. Now in my opinion, that's a big advantage because you're going to be able to maintain that factory look and you're not going to have to sacrifice the usability. It's going to give us really good clearance, especially for those folding accessories because the end of the receiver tube opening is going to sit pretty much flush with the edge of our bumper. more
Watch Video
11/20/2019 1:57:50 PM
Draw-Tite Max-Frame Trailer Hitch Installation - 2020 Subaru Forester- Video
Ryan: How's it going Ryan here at etrainer.com. Today on our 2020 Subaru Forester, we're going to be taking a look at and showing you how to install the Draw-Tite Max-Frame trailer hitch receiver. Right off the bat, this hitch is going to be a little bit visible, but in my opinion, it really doesn't look too bad, and kind of goes well and matches that Subaru image.Now, this is a class III hitch, so it's going to have that two inch by two inch receiver tube opening, which is really going to give us a ton of different options, as far as what we want to do with it. So whether you're pulling a trailer, putting in a cargo carrier or even using it for those accessories like a bike rack, this is going to get the job done and work really well. And as a bonus, it's going to give us some pretty good clearance too. The end of the receiver tube, it's going to sit just behind the bumper, so that's going to be perfect for those folding accessories.We're going to have a reinforced collar here for extra strength, and it's also going to have these standard sized 5/8ths pin hole. more
Watch Video
11/20/2019 1:52:47 PM
etrailer.com Trailer Hitch Installation - 2019 Subaru Crosstrek- Video
Shane: Hi guys. Shane here with etrailer.com. Today I'm going to walk you through how to install the etrailer.com Class III trailer hitch receiver on your 2019 Subaru Crosstrek. This hitch is going to be a great hitch for the Subaru. It's going to be a class three hitch. It's going to have a 2" by 2" receiver tube opening. more
Watch Video
10/30/2019 11:48:05 AM
Best 2020 Subaru Forester Trailer Hitch Options- Video
Hey everybody, Ryan here @etrailer.com. Today we're going to be taking a look at our best hitch options for our 2022 Subaru Forester. Up top here we have the Curt class three, two inch hitch. Here in the center, we have the Draw-Tite class three, two inch. And down here, we have the Curt class two inch and a quarter. Now we're primarily going to be comparing our class three hitches. more
Watch Video
9/4/2019 11:57:31 AM
Best 2019 Subaru Forester Trailer Hitch Options- Video
Hey everybody, Ryan here at etrailer.com. Today, we're going to be taking a look at our best hitch options for our 2019 Subaru Forester.Up top here, we have the CURT Class three, two inch hitch. Here in the center, we have the Draw-Tite Class three, two inch, and down here, we have the CURT class two, inch and a quarter. Now, we're primarily going to be comparing our Class three hitches. However, I did want to bring the CURT out and talk a little bit about it, because this could potentially be the right choice for you.The biggest difference I noticed between the two hitches is in the appearance. The CURT is going to have a little more of a gloss or shiny finish, while the Draw-Tite is going to have a little more of a flat or matte finish. more
Watch Video
8/28/2019 2:42:22 PM
Curt Trailer Hitch Installation - 2019 Subaru Forester- Video
Ryan: How's it going, Ryan here at etrailer.com. Today on our 2019 Subaru Forester, we're going to be taking a look at and showing you how to install the Curt Two Inch Trailer Hitch Receiver. Many Subaru owners plan on using their vehicles to do a little bit of everything, and this is going to work perfect for that. Since it is a two inch by two inch, your options, as far as accessories go, are going to be more or less endless. The hitch is going to give us some pretty good clearance. It's going to sit right behind the edge of our bumper. more
Watch Video
8/26/2019 12:29:41 PM
Curt Trailer Hitch Installation - 2019 Subaru Forester C12198- Video
How's it going, Ryan here at etrailer.com. Today on our 2019 Subaru Forester, we'll be taking a look at and showing you how to install the CURT inch and a quarter trailer hitch receiver.Right off the bat, in comparison to some of the other hitches available, this one is going to be a little more hidden because of its low profile design. That's because the hitch is a class two, so it's going to have that inch and a quarter, by inch and a quarter receiver tube, it would be a little bit smaller than those two inch hitches. So it's going to work perfect for those hitch-mounted accessories, especially those bike racks. I really like the look of the reinforced collar and it's also going to provide us with a little more strength. It is going to have a half inch size pin hole. more
Watch Video
8/26/2019 12:22:15 PM
etrailer.com Trailer Hitch Installation - 2017 Subaru XV Crosstrek- Video
How's it going Ryan here at etrailer.com, today on our 2017 Subaru Crosstrek, we're going to be taking a look at and showing you how to install the etrailer.com, Class 3, Two-inch Trailer Hitch Receiver. Now compared to some of the other hitches available, this one is going to be a little bit more visible, but in my opinion, it looks pretty good on the back of our Subaru. It's going to match the body lines nicely and almost look like it belongs. And there is an upside to that visibility, that's going to be how easy it is to use since everything is in the open, it's going to be really easy to get all of our accessories connected and disconnected. Another thing, I noticed, is that our hitch is going to give us some really good clearance. And what I mean by that is the end of our receiver tube is actually going to stick out just a little bit past our bumper and that's going to be perfect, especially for those folding accessories.Another thing, that separates this hitch from some of the others is its finish, it's going to have a matte black, carbide powder coat finish, which is going to stay in really good shape, be scratch-resistant and it's also going to match our Subaru's trim package, almost spot on. more
Watch Video
8/15/2019 12:12:16 PM
EcoHitch Hidden Trailer Hitch Installation - 2016 Subaru Outback Wagon- Video
Hi there, Outback owners. Today on our 2016 Subaru Outback wagon, we're going to be taking a look at EcoHitch's class two one and a quarter inch trailer hitch receiver and what I really like about this hitch in comparison with others is that it's environmentally friendly because the entire thing is constructed of recycled steel. So the whole process is going to be greener than any of the other hitch manufacturers out there. Beyond it's eco friendly design, it's also going to be great for hauling bikes. A bike rack could easily fit in here with a 350 pound tongue weight on our hitch. You could easily load up four bikes on it. more
Watch Video
7/29/2019 11:15:28 AM
Curt Trailer Hitch Installation - 2016 Subaru Outback Wagon- Video
Hi there, Outback owners. Today on your 2016 Subaru Outback Wagon, we're going to be taking a look at and showing you how to install Curt's Class 3 Two Inch Trailer Hitch Receiver.This is what our hitch is going to look like when it's installed. Our cross tube is going to be hidden completely behind the bumper, so you're only going to see the receiver here at the back. It's a class 3 two inch by two inch receiver, so it's going to be great for all of your towing needs. Whether you're going to be throwing a cargo carrier on the back to help free up some space inside the vehicle for more passengers or cargo, or if you want to throw a bike rack on the back instead of getting a roof rack mounted version, which can be a little more cumbersome and difficult to get your bikes up on the roof, versus a much lower and easier to access hitch mounted bike rack. Could also throw a draw bar in there and do some light towing with it as well.It uses a 5/8 inch hitch pin and clip. more
Watch Video
7/29/2019 11:14:45 AM
3 4 5
Filter Videos
Filter Videos
